<meter id="mvynp"></meter>
          球型鑲齒滾刀參數對破巖比能影響性研究
          2020-05-06 10:10
          來源: 紹興交投

          字號:

          論文題目:

          球型鑲齒滾刀參數對破巖比能影響性研究

          論文類別:

          CSCD核心

          單位及作者:

          浙江紹金高速公路有限公司 侯義輝

          論文摘要:

          研究球型鑲齒滾刀破巖過程中刀盤轉速、鉆壓、鑲齒數、刀盤間距以及貫入度5 種因素對破巖比能的影響,利用ABAQUS 有限元計算軟件,建立雙排滾刀直線切割圍巖的動力顯式模型;基于正交試驗法,設置五因素四水平正交試驗L16(45),通過極差分析和方差分析找出不同因素變化對破巖比能的影響規律,并對比分析最優組合和最不利工況下滾刀滾動力和破巖效果。研究結果表明:影響滾刀破巖比能因素的主次順序依次是鉆壓、刀盤排距、轉速、刀齒數和貫入度;適用于中風化凝灰巖互層的鉆具參數為轉速12.56 m/s,鉆壓25 kN,刀齒數34 個,刀盤排距35 mm,貫入度1 mm,此時的破巖比能為0.382 8 MJ/m3,優化效果較好。

          關鍵詞:

          滾刀破巖;破巖比能;正交試驗;極差分析;方差分析

          正文:

          球型鑲齒滾刀參數對破巖比能影響性研究.pdf


          參考文獻:

          [1] 荊國業. 大直徑反井鉆井穿越特殊地層關鍵施工技術研究[J]. 煤炭工程, 2019, 51(5): 68?72.

          JING Guoye. Research on key construction technology of large diameter raise boring through special stratum[J].Coal Engineering, 2019, 51(5): 68?72.

          [2] 劉志強. 大直徑反井鉆機及反井鉆進技術[J]. 煤炭科學技術, 2008, 36(11): 1?3.

          LIU Zhiqiang. Large diameter raise boring machine and raise boring technology[J]. Coal Science and Technology, 2008, 36(11): 1?3.

          [3] 劉志強. 大直徑反井鉆機關鍵技術研究[D]. 北京: 北京科技大學, 2014.

          LIU Zhiqiang. Study on the key drilling technology by large-diameter raise boring machine[D]. Beijing: Beijing University of Science and Technology, 2014.

          [4] 馬志遠. BMC(LM)系列反井鉆機在山西反井工程中的應用[J]. 中國煤炭, 2009, 1(1): 56?58, 67.

          MA Zhiyuan. Application of BMC(LM) series raiseboring

          machines in raise boring projects in Shanxi[J].

          China Coal, 2009, 1(1): 56?58, 67.

          [5] 李志, 劉志強, 胡敬東, 等. 鑲齒滾刀的破巖機理及分形研究[J]. 煤礦機械, 2007, 28(2): 31?33.

          LI Zhi, LIU Zhiqiang, HU Jingdong, et al. Fragmentation principle and grading research of tungstem-carbide-tipped cutter[J]. Coal Mine Machinery, 2007, 28(2): 31?33.

          [6] 韓博, 劉志強, 荊國業, 等. 滾刀破巖試驗裝置的研制及應用[J]. 煤礦機械, 2015, 36(12): 214?217.

          HAN Bo, LIU Zhiqiang, JING Guoye, et al.

          Development and application of experiment device


          for rock fragmentation by rolling cutter[J]. Coal Mine Machinery, 2015, 36(12): 214?217.

          [7] 吳帆, 殷麗君, 張浩, 等. 鑲齒滾刀破巖機理及效率的旋轉破巖試驗[J]. 中國公路學報, 2018, 31(10): 150?159.

          WU Fan, YIN Lijun, ZHANG Hao, et al. Rock

          fragmentation mechanism and efficiency under

          inserted-tooth roller cutter by rotary cutting test[J]. China Journal of Highway and Transport, 2018, 31(10): 150?159.

          [8] 孟益平, 汪瑩瑩, 譚昊. 反井鉆機球形鑲齒滾刀破巖數值分析[J]. 建井技術, 2016, 35(5): 29?33.

          MENG Yiping, WANG Yingying, TAN Hao. Numercial

          analysis on rock breaking with sphercial inserted rolling cutters of raise boring machine[J]. Mine Construction Technology, 2016, 35(5): 29?33.

          [9] Cho Jung-Woo, Jeon Seokwon, Yu Sang-Hwa, et al.

          Optimum spacing of TBM disc cutters: A numerical

          simulation using the three-dimensional dynamic

          fracturing method[J]. Tunnelling and Underground Space Technology, 2010, 25(3): 230?244.

          [10] 汪瑩瑩. 不同齒形的鑲齒滾刀破巖效果模擬仿真[D].合肥: 合肥工業大學, 2017.

          WANG Yingying. Numerical analysis on rock breaking

          effect with different inserted tooth rolling cutters[D].Hefei: Hefei University of Technology, 2017.

          [11] 曾志遠. 鑲齒滾刀正壓力與滾動力預測模型研究[D].合肥: 合肥工業大學, 2018.

          ZENG Zhiyuan. Study on the normal force and rolling

          force prediction model of inserted tooth hob[D]. Hefei: Hefei University of Technology, 2018.

          [12] 張珂, 李亮, 王賀, 等. 基于ABAQUS 的滾刀破巖參數對滾動力及比能的影響[J]. 沈陽建筑大學學報(自然科學版), 2017, 33(5): 914?922.

          ZHANG Ke, LI Liang, WANG He, et al. Research on the

          impact of the disc cutter broken rock parameters on rolling force and specific energy based on ABAQUS[J].Journal of Shenyang Jianzhu University (Natural

          Science), 2017, 33(5): 914?922.

          [13] 魏效玲, 薛冰軍, 趙強. 基于正交試驗設計的多指標優化方法研究[J]. 河北工程大學學報(自然科學版), 2010,27(3): 95?99.

          WEI Xiaoling, XUE Bingjun, ZHAO Qiang.

          Optimization design of the stability for the plunger assembly of oil pumps based on multi-target orthogonal test design[J]. Journal of Hebei University of Engineering(Nature Science Edition), 2010, 27(3): 95?99.

          [14] JTG D70—2004, 公路隧道設計規范[S].

          JTG D70—2004, Code for design of road tunnel[S].

          [15] Okan S, Akcin N A. Numerical simulation of rock cuttingusing the discrete element method[J]. International

          Journal of Rock Mechanics and Mining Science, 2011,48(3): 434?442.

          [16] Martine, Stefan L, Robert G. Tunnel boring machine performance prediction with scaled rock cutting tests[J]. International Journal of Rock Mechanics and Mining

          Sciences, 2014, 70(9): 450?459.

          [17] Moon T, Oh J. A study of optimal rock-cutting conditionsfor hard rock TBM using the discrete element method[J].Rock Mechanics and Rock Engineering, 2012, 45(5):

          837?849.

          [18] 夏毅敏, 歐陽濤, 陳雷, 等. 盤形滾刀破巖力影響因素研究[J]. 應用基礎與工程科學學報, 2012, 20(3): 500?507.

          XIA Yimin, OUYANG Tao, CHEN Lei, et al. Study on

          influencing factors of rock breaking force of disc hob[J].Journal of Basic Science and Engineering, 2012, 20(3):500?507.

          張珂, 王騰躍, 孫紅, 等. 全斷面巖石掘進機盤形滾刀破巖模擬[J]. 沈陽建筑大學學報(自然科學版), 2010,26(6): 1209?1213. 

          ZHANG Ke, WANG Tengyue, SUN Hong, et al.

          Simulation study on disc cutter of full face rock tunnel boring machine[J]. Shenyang: Journal of Shenyang

          Jianzhu University (Natural Science), 2010, 26(6): 1209?1213.

          [20] JB/T7510—94, 工藝參數優化方法正交試驗法[S].JB/T7510—94, Orthogonal test method for optimizing technological parameters[S].





          發表刊物

          (CN或ISSN號):

          《鐵道科學與工程學報》(CN:43-1423/U,ISSN:1672-7029),2020年5月第17卷第5期,1287-1294

          分享到:

          地址:紹興市越城區鳳林西路135號 網站標識碼:08011982號-1 浙ICP備

          公安備案號:33060202000049 技術支持:浙江新藍網絡傳媒有限公司

          全彩无遮巨大乳尖奶怀孕漫画,女朋友突然动得特别快还叫,美女吹潮喷水在线播放的视频